Today is 2021-11-29 Monday,Welcome to this site 


Matters needing attention for cable joint installation

Word:[Big][Middle][Small] QR Code 2018-10-23     Viewed:    


(The pictures come from the Internet

Medium and low voltage cable conductor connection is commonly used compression, pressure should be noted

(1)Select proper conductor connection pipes of electrical conductivity and mechanical strength;

(2)The fit gap between the inner diameter of the pressure pipe and the outer diameter of the connecting core is 0.8-1.4mm;

(3)The electrical resistance of the spliced connector shall not be greater than 1.2 times of the constant cross-section conductor;

(4)Before compression, conductive adhesive is applied on the outer surface of conductor and inner surface of connecting tube, and oxide film is destroyed by wire brush;

(5)Use a file or sandpaper to smooth the sharp edges of the conductor that connect the tube core。

Contact Us

  Anhui xinruitai electric co. LTD

  Contact person: lian manager

  Telephone: 18726706632

  Address: zeng zhuang, east of lusu road, wanglou administrative village, lumiao town, qiaocheng district, bozhou city, anhui province

Go Back
Wechat QR code